Gorgy Timing LEDI NETWORK TOP Série Mode D'emploi page 77

► 5. when no DhCP server is reachable, the server takes automatically an IP ad-
dress in the range 169.254.x.y. You need to change your computer IP to the same
range (for example 169.254.0.1) and a network mask 255.255.0.0. You can even-
tually use a cross cable.
The server is detected:
► YES
You can now configure your server through the WEB page.
► nO
The server is maybe in fixed IP address mode.
hOw aCCEDInG tO thE SERvER USInG ItS MaC aDDRESS?
The physical address (MAC) of the Ethernet interface is written on the bottom. It is a
12-hexadecimal number (for example 00-20-4a-82-8c-1d).
In a command window, type:
The server is fixed temporarily at the IP address 192.168.10.53. You can now configure its
IP address through the WEB page or GtnetManager.
thE wEB PaGE Can't BE OPEnED?
► 1. First, is the server reachable with GtnetManager?
► YES
Your computer and the server should have the same IP range and the same network
mask.
► nO
See previous question.
MDE-LEDInetworkTOP-4092-V1.1
arp -s 192.168.10.53 00-20-4a-82-8c-1d
then:
telnet 192.168.10.53 1
77