Connections - Gorgy Timing LEDI NETWORK TOP Série Mode D'emploi

This appendix contains a description of the different connectors of the LEDI NETWORK
TOP. The bottom of the product has two 2 points plugs (for the power supply and for the
pulse output), and an Ethernet RJ45 plug.
Here are the connections for power supply and the static relay pulse output:
StatIC RELaY OUtPUt :
► Polarity : without polarity
► Max. switching voltage : 60 V AC/DC
► Max. switching current : 350 mA
► Insulation voltage : 1500 V AC
► Response delay (ton/toff) : 0,5 / 0,05 ms
► Temperature of use : -20°C to +80°C
Example of how to use the static relay output
VCC
pulse
WARNING : You must ensure that
MDE-LEDInetworkTOP-4092-V1.1
VCC GND
18-72 VDC
Max current : 350 mA
Haut parleur
R
1
2
6.
Static relay
output
+
External
DC or
AC
-
Power
V
i mA
350
= <
R

COnnECtIOnS

ATTENTION :
V max = 60 Volts
73