B/ Hardware - Gorgy Timing LEDI NETWORK TOP Série Mode D'emploi

► ntpCliSyncSrvtable
A table that contains all the servers used for synchronization and information. First
entry in the table is server being used for synchronization. Second entry is the pre-
ferred second server, etc. Each entry has the following format:
• ntpCliSyncSrvRank:
rank of the server. Server of rank 1 is used for synchronization.
• ntpCliSyncSrvAddress:
IP address of the server.
• ntpCliSyncSrvAccuracy:
Accuracy of the server as returned in the NTP frame (something like 2^-x se-
conds).
• ntpCliSyncSrvUpAccuracy (Gorgy Timing server only):
Accuracy of the server as returned during auto-detection stage.
• ntpCliSyncSrvUpSrvLoad (Gorgy Timing server only):
Load of the server (average number of requests per second) as returned during
auto-detection stage.
• ntpCliSyncSrvPrefered (Gorgy Timing server only):
A number that indicates a user-defined rank attached to this server. When auto-de-
tection is activated, the LEDI NETWORK TOP takes the server with higher rank.

B/ hardware

The hardware MIB is a generic tree for all Gorgy-Timing devices. It describes the confi-
guration of the detected outputs of the device. For the LEDI NETWORK TOP, the MIB
will display the pulse output configuration (activation, offset, time zone):
MDE-LEDInetworkTOP-4092-V1.1
9
69