Gorgy Timing LEDI NETWORK TOP Série Mode D'emploi page 68

mm/yy)
► ntpCliSerialnumber
Serial number of this product on 6 digits.
ntpCliMaC
►
Hardware address of the Ethernet interface of the LEDI NETWORK TOP. This ad-
dress is on the form aa:bb:cc:dd:ee (6 binary bytes).
► ntpCliMessageString
A text that gives the description of the last generated trap. This text is also attached
to the trap.
► ntpCliResetInfo
A text that indicates why the product has restarted (reconfiguration or hard reset).
ntpCliSoftwareState
►
This field gives the current state of the NTP client software. It can take one of the
following values:
• Idle:
the product has just started.
• Autodetection:
no NTP server has been specified and the product is trying to detect NTP
server(s).
• Autodetectfail:
no NTP server found for synchronization – the product will use a server as soon as
you connect a server on your network.
• Learning:
the software is currently learning network properties.
► ntpCliSyncMode
The synchronization mode currently used. It can be one of the following values:
• Autodetect:
no NTP server has been specified and the product is trying to detect NTP
server(s).
• Sync1server:
works with only one NTP server.
• Sync2server:
works with two NTP servers. When a server fails, it uses the other one.
• Sync3server:
works with 3 NTP servers. When a server fails, it uses one of the other servers.
68 MDE-LEDInetworkTOP-4092-V1.1