Symbols On The Equipment - Grizzly MTS 30-10 E2 Traduction De La Notice D'utilisation Originale

GB

Symbols on the Equipment

On the equipment, there are information symbols. These convey important information
about the product or information about its use.
• Caution: Special safety measures are required when handing the equipment!
• The entire operating instructions must be read and understood before use. Non-
observance of the operating instructions may be fatal!
Read the operating
instructions carefully before
using the equipment.
Wear eye protection.
Wear eye head protection.
Wear ear protection.
Wear protective gloves.
Risk of injury from cuts.
Wear safety boots with sturdy
soles.
Ensure that the cutting head
does not come into contact
with foreign bodies when start-
ing or during the work.
Maintain a safety distance of
min. 15 m from others.
Danger from parts being
thrown out! Keep away from
other people.
Caution! Fuel and fuel fumes
are fl ammable. Risk of fi re and
explosion!
Caution! Spring-back - Be
careful of spring-back of the
machine during work.
Caution: Special safety meas-
ures are required when hand-
ing the equipment!
96
Caution! Hot surfaces – risk
of burns!
Caution! Hands off !
Risk of injury
Do not touch the cutter!
Specifi cation of the guaran-
teed sound power level L
in dB.
Mix ratio 40:1,
40:1
Benzin / Petrol Öl / Oil
Use ONLY fuel mix
1 ltr. + 25ml
5 ltr. + 125ml
Thread cutting width
Blade cutting width
Symbol on the fuel pump:
Press the fuel pump 6x before
starting
cold
Symbol on the choke lever
start
Lever in cold start position
(START)
Lever in warm start position
warm
start
(RUN)
WA