Changing The Fuel Filter; Adjusting The Carburettor; Maintenance Intervals - Grizzly MTS 30-10 E2 Traduction De La Notice D'utilisation Originale

Changing the Fuel Filter

(Picture 14)
Never operate the equipment
without a fuel filter. Change the
fuel filter regularly.
1. Drain the fuel tank (2) into an appro-
priate container.
2. Pull the fuel suction head (50) out of the
tank with a hook and turn to pull it off.
3. Replace the fuel filter and place the
removed suction head back in the tank
pic. 14

Maintenance intervals

Machine Part
Screws, nuts, bolts
Air filter
Fuel filter
Spark plug
Fuel hoses
Complete machine
Operating handle
Cutting head
50
2
Action
Check, tighten
Clean or replace
Replace
Clean/adjust/replace
Check, replace if necessary
Check, clean if necessary
Check for function
Check correct installation

Adjusting the Carburettor

The carburettor is preset in the factory for
optimal performance. If subsequent ad-
justments are required, have them carried
out by a specialist workshop.
Before
Each Use




GB
Operating Hours
10 20




107