Survey; Functional Description; Safety Instructions; Symbols In The Manual - Grizzly ERT 450-20 Traduction De La Notice D'utilisation Originale

Survey

1 Power cable
2 Upper handle
3a Switch lock
3b ON / OFF switch
4 Strain relief
5 Additional handle
6 Knurled nut and screw
7 Handle rod
8 Clamp for handle section
(length) adjustment
9 Telescopic tube
10 Foot lever for adjusting the angle
of inclination
11 Motor head
12 Chassis
13 Cutter head with line spool or
cutting thread
14 Spacing bow (flower protection)
15 Castor roll
16 Cord cutter (not visible)

Functional description

The portable, hand-guided lawn trimmer is
powered by an electric motor. The trimmer
features a dual line spool as the cutting
device.
For grass trimming there are two nylon
threads rotating parallel with the ground
or, for vertical edge trimming, roughly per-
pendicular to the ground.
The following describes the functions of
the operating parts.

Safety instructions

Before starting to use the ap-
pliance you should know and
understand all its parts. Prac-
tice using the appliance and
have an experienced user or
expert explain its functionality,
method of operation and best
practices to you. Make sure
you can immediately shut
off the appliance in case of
emergency. Improper use of
the appliance may cause seri-
ous injury.

Symbols in the manual

Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the
instruction is explained at
the place of the exclamation
mark) with information on
preventing damage.
Help symbols with informa-
tion on improving tool han-
dling.

Symbols on the trimmer

Caution!
Read the operating instruc-
tions carefully.
Wear eye and ear protection
Do not expose the equip-
ment to the damp. Do not
work in the rain and do not
cut wet grass.
The cutting head will
continue to rotate for a
few seconds after the
equipment has been
switched off. Keep hands and feet
well away.
GB
55