Start Washer - Alliance Laundry Systems 202630CAR3 Mode D'emploi

One Speed Washers
Figure 23
Two Speed Washers
NOTE: Wash temperature and fabric selector settings
may be changed any time before first wash fill is com-
plete.
Set wash temperature at HOT (COLD rinse), WARM (COLD
rinse) or COLD (COLD rinse).
Two Speed Washers
Figure 24
Set fabric selector at *NORMAL, *PERM PRESS/ CASUAL,
NORMAL or PERM PRESS/CASUAL for regular loads. Set at
*DELICATE or DELICATE for delicate loads.
Settings with asterisk (*) are Energy Saving Cycles.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Two Speed Washers
TLW2045N_SVG

Start Washer

Metered Models
1. Insert money by placing coin(s) in slide.
2. Carefully push slide in as far as possible and then pull slide
3. The IN USE light will come on indicating start of cycle.
Nonmetered Models
1. Push start switch.
TLW2084N_SVG
2. The IN USE light will come on indicating start of cycle.
21
Figure 25
out as far as possible.
Figure 26
Operation
TLW2085N_SVG
W297I_SVG
Part No. 202630R3