Wipe Out Inside Of Wash Tub; Connect Fill Hoses - Alliance Laundry Systems 202630CAR3 Mode D'emploi

1
3
1. Shipping Brace
2. Shipping Plug
3. Cardboard Base

Wipe Out Inside of Wash Tub

Prior to first wash, use an all purpose cleaner or a detergent
and water solution and a damp cloth to remove shipping dust
from inside of the washer.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
TLW2098N_svg
Figure 2
2

Connect Fill Hoses

Under certain conditions, hydrogen gas may be pro-
duced in a hot water system that has not been used
for two weeks or more. HYDROGEN GAS IS EXPLO-
SIVE. If the hot water system has not been used for
such a period and before using the washer, turn on
all hot water faucets and let the water flow from each
for several minutes. This will release any accumula-
ted hydrogen gas. The gas is flammable. Do not
smoke or use an open flame during this time.
Mixing Valve Flow Rates
Pressure
kPa [psi]
138 [20]
827 [120]
11
Figure 3
WARNING
HOT COLD
liters per mi- liters per mi-
nute [gallons nute [gallons
per minute] per minute]
12.9 [3.4] 12.9 [3.4]
17.4 [4.6] 17.4 [4.6]
Installation
TLW2099N_SVG
W029
WARM
liters per mi-
nute [gallons
per minute]
15.1 [4.0]
17.4 [4.6]
Part No. 202630R3