gefran SIEIDrive LIFT AGy-L Mode D'emploi page 58

Sizes from 4185 to 82000
c
Type
a
4185
4221
309 (12.1)
4301
4371
5450
376 (14.7)
5550
6750
7900
71100
509 (20)
71320
81600
82000
Mounting Clearance
The Drives must be mounted in such a way that the free flow of air is ensured.
The clearance to the device must be at least 150 mm (6 inches).
A space of at least 50 mm (2 inches) must be ensured at the front.
On sizes 81600 and 82000 the top and bottom clearance must be at least 380 mm (15 inches), on front and sides must be
ensured a space of at least 140 mm (5.5 inches).
Devices that generate a large amount of heat must not be mounted in the direct vicinity of the frequency inverter.
Fastening screws should be re-tightened after a few days of operation.
³
10 mm ( 0.4" )
[140mm (5.5")]
58
Dimensions: mm (inch)
b c
268 (10.5)
489 (19.2) 225 (8.8)
308 (12.1)
564 (22.2)
741 (29.2)
297.5 (11.7)
909 (35.8)
965 (38) 442 (17.4)
³
150 mm ( 6" )
[380mm (15")]
³ ³
20 mm ( 0.8" ) 150 mm (
[140mm (5.5")] [380mm (15")]
a
D1
D1 D2 D3
-
-
- 150 (5.9)
- - 100 (3.9)
³ ³
6" ) 10 mm ( 0.4" ) 50 mm ( 2" )
[140mm (5.5")] [140mm (5.5)]
[...] for 81600-82000 sizes
D1
D2 D2
D3 D3 D3 D3
Montaggio a muro
Mounting wall (D)
Weight
D4 Ø kg (Ibs)
18 (39.6)
475 (18.7)
22 (48.59)
22.2 (48.9)
550 (21.6) 34 (74.9)
M6
725 (28.5) 59 (130)
75.4 (166.1)
891 (35) 80.2 (176.7)
86.5 (190.6)
947 (37.3) 109 (240.3)
D4
dim2-g
AGy -L