Table Of Sc-922 Function Items In Accordance With The Additional Devices - JUKI SC-922 Mode D'emploi

13. TABLE OF SC-922 FUNCTION ITEMS IN ACCORDANCE WITH THE
ADDITIONAL DEVICES
Additional Function
Function item
device No.
2-pitch 148 2-pitch output during
device reverse feed stitch-
ing at start or at end
149 Inversion of 2-pitch
output during output-
ting alternate vertical
amount
150 2-pitch initial output
Alternate 144 Setting of number of
vertical stitches of automatic
amount release of alternate
change vertical output
device
146 Selection of alternate
vertical output after
thread trimming
147 Alternate vertical
initial output
Needle 156 Selection of needle
thread thread clamp switch
clamp function
device
Starting Setting
level range
User 0, 1 0 : Invalid
1 : 2-pitch is output during controlling
reverse feed stitching at start or end.
User 0, 1 0 : Invalid
1 : State of 2-pitch output is inversely
output, synchronizing with alternate
vertical output.
User 0, 1, 2 0 : When the power is ON, reset is made
with the status of the previous power
OFF.
1 : When the power is ON, 2-pitch output
is turned OFF.
2 : When the power is ON, 2-pitch output
is turned ON.
User 0, 0 : Automatic release is invalid.
1 to 30 1 to 30 : Release of alternate vertical out-
stitches
User 0, 1, 2 0 : Invalid
1 : Alternate vertical output is forcibly
turned OFF after thread trimming.
2 : Alternate vertical output is forcibly
turned ON after thread trimming.
User 0, 1, 2 0 : When the power is ON, reset is made
with the status of the previous power
OFF.
1 : When the power is ON, alternate verti-
cal output is turned OFF.
2 : When the power is ON, alternate verti-
cal output is turned ON.
User 0, 1, 2 0 : When the needle clamp switch is
turned ON, this function is enabled.
1 : Needle clamp function will be disabled.
2 : Needle clamp function is enabled forci-
bly.
– 20 –
Description
put is automatically performed by
the number of stitches.
Applicable
model
LU-2212N-7
LU-2220N-7
LU-1500N-7
LU-1520NC-7
LS-1342-7
DNU-1541-7
PLC-1700-7
LU-2200N-7
LU-2220N-7