Threading The Panel Thread Guide; One-Touch Utility Manual Reverse Feed Stitching; Front Tie Stitching; How To Operate - JUKI SC-922 Mode D'emploi

6. THREADING THE PANEL THREAD GUIDE

[DU-141H-7, DSU, DSC, LZH-1290-7]
DU-141H-7, DSU, LZH-1290-7
❶
DSC
❶
❷

7. ONE-TOUCH UTILITY MANUAL REVERSE FEED STITCHING

❷

8. FRONT TIE STITCHING

Normal feed
❶
❷
❶
❶
Pass needle thread ❶ coming from the thread stand
through the hole in panel thread guide ❷ .
❷
❷

(1) How to operate

1) The moment switch ❶ is pressed, the machine
feeds the material in the reverse direction and
performs reverse feed stitching.
2) The machine performs reverse feed stitching as
long as the switch is held pressed.
3) The machine resumes normal feed stitching at
the moment when the switch is released.
(Caution) Do not strongly press or strike the switch.
The switch may be damaged.

(2) Position of the switch

1) Approximately position the switch so that you can
operate it with ease.
2) Loosen screws ❷ and adjust the position of the
switch by moving it up or down.
In the case where stitch skipping occurs at the start
of sewing when performing single tie stitching ("V" tie
stitching), perform 1 to 2 stitches of normal feed at
the start of sewing.
– 14 –