JUKI SC-922 Mode D'emploi page 33

[In case the air hose number is not indicated on the solenoid valve (asm.) (LZH, DU-141H, DSC, DSU)]
❶
❸
LZH-1290-7
❹
DU-141H-7 / DSC / DSU
❹
❸
❶
❷
❻
❸
❷
❶
❽
❾
❼
❺
– 7 –
1) Connect air hose ❶ to joint ❷ and connect air
hose ❸ to joint ❹ . If the air hose is too long, cut
it to an appropriate length.
2) Install regulator ❺ on the bottom surface of the
table using the wooden screws ❻ supplied with
the unit. Connect air hose ❼ of the regulator to
joint ❽ of the solenoid valve (asm.).
3) When all the piping has been completed, adjust
the air pressure to 0.4 to 0.5 MPa (4 to 5 kgf/cm²)
using knob ❾ of the regulator.