Covered Areas - Fiat TIPO 2015 Mode D'emploi

PIN
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
PIN
B1
B2
B3
B4
B5
B6
B7
B8
C
OVERED AREAS
Considering a car moving towards an obstacle, it is defined as FIRST APPROACH DISTANCE (1) the
distance at which the system starts producing intermittent signals, and as SECOND APPROACH
DISTANCE (2) the distance at which the signal becomes continuous.
The first approach distance has a minimum value of 150 cm ± 10 cm from the end of the vehicle body
and over the entire width of the latter (excluding the wing mirrors).
The second approach distance starts 30 ± 5 cm from the end of the vehicle body and must cover its
entire width (excluding the wing mirrors).
All rights reserved. The circulation and reproduction of all or part of this guide by any means is prohibited.
FIAT TIPO
Signal Description
Ignition power
n.c.
n.c.
n.c.
n.c.
CAN + HIGH
System ground
n.c.
n.c.
n.c.
n.c.
CAN - LOW
Signal Description
Sensor (Rear right external)
Sensor (Rear right internal)
Sensor (Rear left internal)
Rear sensor power feed
Sensor (Rear left external)
Trailer input
n.c.
Sensor ground
-84- 0.0
REV