Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
This high-pressure cleaner was developed for household use, such as the washing/spraying of cars,
boats, terraces, small walls, etc. So use it exclusively for this type of work and not for (excessively)
heavy and/or industrial purposes!
You can spray cold and lukewarm water to a maximum of 40°C. Hotter water can damage the pump. Do
not use water that contains dirt, sand or chemicals – this may damage the machine and the operation
and shorten the life span of the machine.
The safety regulations specified elsewhere in this booklet must be taken into account at all times in order
to prevent damage to the machine and the surface to be cleaned and personal injury.
ASSEMBLY
ASSEMBLY
2. Place the reel with handle on the machine
And secure it with two screws on the front
and two screws on the back
(see diagram)
4. Screw the high-pressure hose onto the water outlet
on the back.
6. Decide which jet lance you wish to
use: the narrow/flat jet, the rotating
head or the terrace cleaner. Insert
the end of the relevant lance into the
jet pistol and screw it firmly tight.
19
1. Press the cable hook onto the machine
3. Check that the water filter is in the water inlet and is not
blocked. Then firmly screw the quick-connector onto the
water inlet. The filter catches sand, scale and
contaminants that can damage the pump. Using the
machine without the filter invalidates the guarantee!
5. Screw the high-
pressure hose onto the jet pistol.
Publicité
Table des Matières
