Surfaces In The Oven Cavity; Keeping The Appliance Clean; Cleaning Functions - Thermador Masterpiece Série Mode D'emploi

Surfaces in the Oven Cavity

The slightly textured surface of the back wall, ceiling and
sides in the oven cavity consists of Ecolyse coating
material and should not be cleaned with harsh
chemicals.
The oven cavity bottom is enameled and has a smooth
surface.
Cleaning the oven is easier because there is no cleaning
around a coil element showing on the bottom of the
oven. The hidden lower element is protected from food
soils and spills. Wiping up excess spills is easy.
Cleaning Enamel Surfaces
Clean the smooth enamel surfaces with a dish cloth and
hot soapy water. Dry with a soft cloth.
Soften baked-on food residues with a damp cloth and
soapy water. If there are heavy food deposits use a soap-
filled pad.
Note: Food residues can leave a white coating behind.
These are harmless and do not affect performance. You
can remove these residues using lemon juice if required.

Keeping the Appliance Clean

Always keep the appliance clean and remove food and
food spills immediately so that stubborn deposits do not
build up.
Clean the oven cavity after each use. This will ensure
▯
that food and food spills cannot be baked on.
Always remove flecks of limescale, grease, starch and
▯
albumin (e.g. egg white) immediately.
Use suitable ovenware for roasting, e.g. a roasting
▯
dish.
For cakes or pies that may spill over, place on baking
▯
sheet lined with aluminum foil and place on wire rack.

Cleaning Functions

NOTICE: Do not use oven cleaner on the self-cleaning
surfaces. These will damage the surfaces. If oven cleaner
does get onto these surfaces, wipe it off immediately
using water and a sponge. Do not rub the surface and do
not use abrasive cleaning aids.
Your appliance is equipped with "Ecolytic Clean",
"Easy Clean" and a "Descale" function. The self-cleaning
surfaces in the oven cavity are cleaned with the
"Ecolytic Clean" cleaning function. Use the "Easy Clean"
function for intermediate cleaning of the oven cavity
bottom. Food and food spills are saturated with steam
enabling soils to loosen when using the "Easy Clean"
function and can then be removed more easily. You can
use the "Descale" function to remove limescale from the
evaporator.
Ecolytic Clean
Some surfaces in the oven cavity are cleaned with the
Ecolytic Clean operating mode.
Ecolytic cleaning is constantly cleaning. The side panels,
ceiling panel and back panel are coated with a porous,
matte ceramic material known as an ecolytic coating.
36
The coating absorbs and breaks down splashes over
time from baking, roasting and broiling while the oven is
in operation.
If the surfaces no longer clean themselves adequately
and dark patches appear, the surfaces can be
"refreshed" using the Ecolytic Clean mode which helps
clean the ecolytic coating by operating the unit at a
higher temperature to help speed the process.
Note: During normal operation the appliance records
the number of times it is used and indicates when it has
reached a point where cleaning is recommended. The
recommendation is displayed until the Ecolytic Clean
mode has finished.
If this function is not performed, then the ecolytic
surfaces may become damaged.
If your appliance becomes prematurely soiled or if you
notice dark patches on the back panel, do not wait until
your appliance recommends cleaning. The more often
the appliance is cleaned, the longer the porous surfaces
will retain their cleaning capability. You can clean your
appliance at any time needed using the Ecolytic Clean
function.
Wipe out large spills from the oven before running the
Ecolytic Cleaning function.
Do not clean parts or accessories in the self-clean oven.
Before Running the Ecolytic Clean Function
Remove racks, rails, accessories and ovenware from the
oven cavity.
Cleaning the Oven Bottom and the Inside of the
Appliance Door
Remove the worst food spills from the oven bottom, the
inside of the appliance door and the interior lighting.
Otherwise, patches will appear that cannot be removed.
NOTICE: Do not use oven cleaner on the ecolytic
cleaning surfaces. These will damage the surfaces. If
oven cleaner does get onto these surfaces, wipe it off
immediately using water and a sponge. Do not rub the
surface and do not use abrasive cleaning aids.
Start
Before setting the cleaning function, ensure that you
have followed all instructions for preparation.
Cleaning takes 1 hour. The duration cannot be changed.
Touch the ON l OFF touch button.
1.
Touch the MENU touch button.
2.
Swipe to the left or right to select "Ecolytic Clean
3.
Touch the bottom line.
4.
The cleaning time with Ecolytic Clean is displayed.
Touch the bottom line.
5.
Touch the START l STOP touch button.
6.
The appliance starts Ecolytic Clean. The remaining
time appears on the display.
Keep the kitchen ventilated while the cleaning function is
running.
As soon as the cleaning aid has run through, a signal
sounds and the appliance ends the operation
automatically.
".
™