Proof - Thermador Masterpiece Série Mode D'emploi

Steam Intensity
Different intensity levels are available when adding
steam:
low
▯
medium
▯
high
▯
Suitable Heating Modes
You can add steam for these heating modes:
True Convection
‚
▯
Convection Bake ¶
▯
Bake
ƒ
▯
Speed Convection
÷
▯
Convection Roast
û
▯
Roast
ü
▯
Start
Refill water tank.
1.
Note: Only switch on the Add Steam setting once the
oven cavity has completely cooled down (to room
temperature).
Touch the ON l OFF touch button.
2.
Set the heating mode and temperature.
3.
Touch the ADD STEAM touch button to switch on
4.
steam assistance.
On the display, swipe to the left or right to select the
5.
steam intensity.
Touch the symbol to apply the setting.
8
6.
Touch the START l STOP touch button.
7.
The appliance starts the operation.
Note: If the water tank runs out of water during an
operation with steam assistance, a message appears on
the display prompting you to fill the water tank.
Cancelling Steam Addition
Touch the ADD STEAM touch button to cancel the
1.
addition of steam early.
Touch the steam intensity in the bottom right corner of
2.
the display.
Swipe to the left or right to select "Off".
3.
Touch the symbol to apply the setting.
8
4.
Note: The operation continues without adding steam.
Cancelling
Press the START l STOP button to cancel the appliance
operation.
Note: In a double oven, if both cavities are operating, it
is necessary to select the cavity in which you wish to
make changes.
Exit
Touch the ON l OFF touch button to switch off the
appliance.

Proof

Dough will proof more quickly using the "Proof
than at room temperature and does not dry out.
Use the information in the tables found in the Cooking
Charts Use and Care Guide to select the appropriate
level.
Note: If the water tank runs out of water during operation
with the Proof setting, operation is interrupted. Fill the
water tank.
Start
Refill water tank.
1.
Note: Only switch on the Proof setting once the oven
cavity has completely cooled down (to room
temperature).
Touch the ON l OFF touch button.
2.
Swipe to the left or right to select "Proof".
3.
Touch "1" in the bottom touch field.
4.
Swipe to the left or right to select the required setting.
5.
Touch the symbol to apply the setting.
8
6.
Touch " + " in the bottom touch field.
7.
Swipe to the left or the right to select the required
8.
duration.
Touch the symbol to apply the setting.
8
9.
Touch the START l STOP touch button.
10.
The appliance starts the operation.
As soon as the cooking time has elapsed, an audible
signal sounds and the appliance ends the operation
automatically. Touch the TIMERS touch button to end the
audible signal.
Cancelling
Press the START l STOP button to cancel the appliance
operation.
Note: In a double oven, if both cavities are operating, it
is necessary to select the cavity in which you wish to
make changes.
Exit
Touch the ON l OFF touch button to switch off the
appliance.
" mode
Œ
25