Setting A Heating Mode - Thermador Masterpiece Série Mode D'emploi

Kitchen Timer
The Kitchen Timer can be set when the appliance is
switched on or off.
Touch the TIMERS touch button.
1.
The kitchen timer is shown in the display.
If the appliance is switched on, first touch the
Swipe to the left or right to select the timer value. You
2.
can set hours, minutes and seconds.
Touch the icon.
8
3.
The kitchen timer begins to count down.
The symbol and timer value are displayed in the top
.
left corner of the display.
Note: When the set time has elapsed, a signal sounds.
"Kitchen Timer completed" is displayed.
Delayed Operation - "End time"
The appliance switches on automatically, then off at the
time preselected for the end of operation. To do this, you
set the cooking time and specify the end of operation.
Delayed operation can only be used in combination with
a heating mode.
Notes
Ensure that food is not left in the oven cavity for too
▯
long, as it may spoil.
The option to delay the start of operation is not
▯
available for every heating mode.
CAUTION
9
To maintain food safety, do not leave food in the
oven for more than one hour before or after
cooking.
Place the food onto the appropriate accessory in the
1.
oven cavity and close the appliance door.
Touch the ON l OFF touch button.
2.
Set the heating mode.
3.
Touch the TIMERS touch button. The timer options are
4.
shown in the display.
Select Oven Timer and set a cook time. Touch the
5.
icon.
18
Select TIMERS again and set End Time. Touch the
6.
icon.
Touch the START l STOP touch button.
7.
The appliance waits until the appropriate time to start
the operation.
As soon as the end time has been reached, an audible
field.
.
signal sounds and the appliance ends the operation
automatically.
Checking, changing or deleting settings
Touch the TIMERS touch button.
1.
The time-setting options are shown in the display.
Touch the required timer option.
2.
Swipe to the left or right on the touch display to
3.
change the settings.
To delete a timer value, set "00:00", or touch
"Cancel".

Setting a Heating Mode

Use the touch buttons and the touch fields on the touch
screen to enter the different operating menus.
Example: True Convection with 325° F (160 °C)
Touch the ON l OFF touch button to switch on the
1.
appliance.
You go directly to the heating modes menu.
Swipe to the left in the top line of the display to select
2.
"True Convection"
Swipe to the left or right in the bottom line of the
3.
display to select the temperature.
8
.
‚
8