Setting A Heating Mode - Thermador Professional Série Guide D'utilisation Et D'entretien

Kitchen Timer
The Kitchen Timer can be set when the appliance is
switched on or off.
Touch the TIMERS touch button.
1.
The kitchen timer is shown in the display.
If the appliance is switched on, first touch the
Swipe to the left or right to select the timer value. You
2.
can set hours, minutes and seconds.
Touch the icon.
8
3.
The kitchen timer begins to count down.
The symbol and timer value are displayed in the top
.
left corner of the display.
Note: When the set time has elapsed, a signal sounds.
"Kitchen Timer completed" is displayed.
Delayed Operation - "End time"
The appliance switches on automatically, then off at the
time preselected for the end of operation. To do this, you
set the cooking time and specify the end of operation.
Delayed operation can only be used in combination with
a heating mode.
Notes
Ensure that food is not left in the oven cavity for too
▯
long, as it may spoil.
The option to delay the start of operation is not
▯
available for every heating mode.
CAUTION
9
To maintain food safety, do not leave food in the
oven for more than one hour before or after
cooking.
Place the food onto the appropriate accessory in the
1.
oven cavity and close the appliance door.
Set the heating mode with the rotary selector.
2.
Touch the TIMERS touch button.
3.
The timer options are shown in the display.
Select Oven Timer and set a cook time. Touch the
4.
icon.
Select TIMERS again and set an End Time. Touch the
5.
icon.
8
Select the temperature with the rotary selector.
6.
The appliance waits until the appropriate time to start
the operation.
As soon as the end time has been reached, an audible
signal sounds and the appliance ends the operation
automatically.
Checking, changing or deleting settings
Touch the TIMERS touch button.
1.
The time-setting options are shown in the display.
Touch the required timer option.
2.
Swipe to the left or right on the touch display to
3.
field.
.
change the settings.
To delete a timer value, set "00:00", or touch
"Cancel".

Setting a Heating Mode

Use the function selector and temperature selector to set
the operating mode and temperature.
Use the touch buttons and the touch fields on the touch
screen to enter the different operating menus.
Example: True Convection with 325° F (160 °C)
Turn the function selector to TRUE CONV to switch on
1.
the appliance.
You go directly to the True Convection mode.
Turn the temperature selector to the required
2.
temperature.
After a few seconds the appliance starts operating.
3.
For heating modes that require a preheat the status
bar appears in the display to indicate the preheating
progress.
When the appliance has reached the set temperature,
4.
"Oven preheated" is displayed and an audible signal
sounds. The oven continues cooking with the set
temperature.
8
21