Wet Vacuuming - Advance Advenger 2800ST Mode D'emploi

WET VACUUMING

Steps to follow in fi tting the machine with optional attachments for wet vacuuming.
1 Disconnect the Recovery Hose (37) from the Squeegee (11). Connect the coupler and hose from the wand kit to the recovery hose.
2 Attach suitable wet pick-up tools to the hose. (An optional Wand Kit PN56601087 is available from Advance).
3 Turn the Master Key Switch (A) ON and press the Wand Switch (L). NOTE: The operator cannot be in the seat for the vacuum motor to run on. The vacuum motor will run
continuously until the switch is pressed again. NOTE: The "Recovery Tank FULL" indicator is disabled when the wand mode is activated. The fl oat will stop the fl ow into the
recovery tank.
FIGURE 8
23
revised 2/13
F7
F8
F1
F5
F10
26
F
B
F9
D
F6
O
E
A
29
31
37
11
FORM NO. 56041735 - Advenger
ENGLISH / A-21
G
H
I
J
L
18
3
- A-21
™