Lubricating The Machine; Electromagnetic Brake - Advance Advenger 2800ST Mode D'emploi

LUBRICATING THE MACHINE

Once a month, apply light machine oil to lubricate the:
• Steering Chain
• General Pivot Points For the Squeegee and Scrub Deck Linkage
• Side Skirt Height Adjustment Knobs
• Steering Wheel Shaft Universal joint
• Front Roller Bumper

ELECTROMAGNETIC BRAKE

See Figure 10. The Drive Wheel Assembly (4) has a built in electromagnetic brake that is engaged whenever the Master Key Switch (A) is OFF or the FWD /
REV Drive Pedal (3) is in the neutral position. This brake can be manually over ridden if necessary by inserting a medium to large screwdriver behind the Yoke
(AA) as shown. This should only be done in the event you need to push or pull the unit.
revised 2/13
FIGURE 10
ENGLISH / A-25
FORM NO. 56041735 - Advenger - A-25
™