Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WET VACUUMING

Steps to follow in fi tting the machine with optional attachments for wet vacuuming.
1
Disconnect the recovery hose from the squeegee (17). Connect the coupler and hose from the wand kit to the recovery hose.
2
Attach suitable wet pick-up tools to the hose. (An optional Wand Kit PN56413687 is available from Advance).
3
Turn the Master Key Switch (A) ON and press the Vacuum/Wand Switch (I). The vacuum motor and the pump will run continuously until the switch is pressed again to turn it
OFF. NOTE: The "Recovery Tank FULL" indicator is disabled when the wand mode is activated. The fl oat will stop the fl ow into the recovery tank.
SERVICE NOTE: Refer to the service manual for detailed functional descriptions of all controls and optional programmability.
FIGURE 8-1
revised 9/14
ENGLISH / A-19
FORM NO. 56041986 - Condor™ - A-19

Publicité

Table des Matières
loading

Table des Matières