Servicing - Kemper 79 002 Mode D'emploi

7.3

Servicing

Art.- Nr.: 1502197
Maintenance
Repair work on the extraction arm may only be performed by
personnel that were trained and authorized by the operator.
The instructions in this chapter are limited to important general
information and instructions that must be followed during the
repair work.
The repair works relate mainly to the replacement of the support
frame, the exhaust hood, the slewing ring and the tube. Further
repair work may only be carried out by the KEMPER Service.
Note
The following shall apply for all assembly and disassembly work:
● Mark parts that belong together.
● Mark or record the mounting position and place.
After reassembly, the loosened mechanical connection
must be tightened again.
7-3