Assembly Below A Stationary Filter Unit - Kemper 79 002 Mode D'emploi

5.3

Assembly below a Stationary Filter Unit

Art.- Nr.: 1502197
Fig. 5-7
● Place the rubber seal (2) onto the slewing ring (1) in such a
way that the eight bore holes of the rubber seal (2) lie on top
of the eight holes of the slewing ring (1).
● Screw the slewing ring (1) with
–
–
below the suction opening of the filter unit (4).
Assembly
the flat rubber seal (2),
eight screws M6 x 25 - 8.8 (3)
5-6