Safety Instructions For Maintenance - Kemper 79 002 Mode D'emploi

Safety
The operator ensures that the operating and maintenance
personnel wears personal protective equipment. These include in
particular safety shoes, safety glasses and gloves.
Tie back long hair and do not wear loose clothing or jewelry! There
is always the danger of getting caught somewhere or being pulled
in or dragged along by moving parts!
Should safety-related changes on the extraction arm occur, it
must be immediately stopped and secured and the incidence
should be reported to the responsible person/authority!
Work on the extraction arm must be performed only by trained and
reliable personnel. Observe the minimum age!
The personnel to be trained, taught, instructed or as part of a
general education may only operate on the extraction arm under
the supervision of an experienced person!
2.5 Safety Instructions for Maintenance and Troubleshooting Extraction Arm
Setup, maintenance, repair work and troubleshooting must be
performed only when the system is switched off.
For maintenance and repair work, always tighten loose screws! If
required, tighten the screws provided with a torque wrench.
In particular, clean dirt and care products off connections and
fittings before performing maintenance/repair/care work.
Art.- Nr.: 1502197 2-3