Care; Maintenance - Kemper 79 002 Mode D'emploi

7

Maintenance

7.1

Care

Art.- Nr.: 1502197
Maintenance
The instructions described in this chapter are meant for reference
purposes only. Depending on the operating conditions, further
instructions may be required to keep the extraction arm in an optimal
condition. The time intervals indicated refer to a single-shift operation.
The maintenance and repair work described in this chapter, may only
be performed by specially trained maintenance personnel of the
operator.
The spare parts to be used must meet the technical requirements
specified by KEMPER GmbH.
This is always ensured with original spare parts!
Ensure a safe and environmentally sound disposal of materials
and replacement parts!
● Observe the safety instructions on the following pages!
The care of the extraction arm is essentially limited to periodic
cleaning of all surfaces for dust and other debris. Clean the
extraction arm only by wiping or sweeping.
CAUTION
Improper cleaning of the suction arm can cause malfunction and
damage!
Do not select an aggressive cleaning agent that damages metal
and plastic surfaces and tube connections.
Never clean sensitive components with coarse brushes and high
mechanical pressure. Use lint-free cloths.
Never clean the extraction arm with a water jet, high pressure
cleaner or by blowing with compressed air, harmful dust can get
into the breathing zone of the user and other people.
All aqueous industrial cleaner can be used without any
restrictions.
Appropriate care helps to permanently keep the extraction arm in a
safe operational condition.
● Clean the extraction arm frequently, it is recommended to do so
on a monthly basis.
7-1