Intended Use; Reasonably Foreseeable Misuse; Residual Risk - Kemper 79 002 Mode D'emploi

3.1 Intended Use

3.2 Reasonably Foreseeable Misuse

3.3 Residual Risk

Art.- Nr.: 1502197
Product Description
The extraction arm is designed and built to extract welding fumes
locally.
– The extraction arm must not be used in an explosive
atmosphere, and not for the extraction of explosive
atmosphere.
– The arm is not suitable for the extraction of acid and alkali vapors.
Note
Observe the information under Chapter 9.3, Section Technical
Specifications. The instructions must be strictly observed.
Instructions regarding the intended use also include:
– Safety
– Operation and control,
– Maintenance and servicing
that are described in this manual.
Any other use is not intended for this use. The operator of the
extraction arm is solely responsible for damages that result from
an improper use. This also applies to unauthorized modifications
to the extraction arm.
If the extraction arm is used as intended, no reasonably foreseeable
misuse that could lead to dangerous situations involving personal
injury should be possible.
Even if all safety regulations are observed, the following residual risk
remains when operating the extraction arm. All persons working on and
with the extraction arm need to be aware of this residual risk and follow
the instructions that will prevent these residual risks that lead to
accidents or damage.
During set-up and preparation work, it may be necessary to
dismantle on-site safety equipment. This creates different
residual risks and potential hazards that the operator must be
aware of:
3-2