Assembly On A Mobile Filter Unit - Kemper 79 002 Mode D'emploi

5.2

Assembly on a Mobile Filter Unit

Art.- Nr.: 1502197
Fig. 5-5
● Place the rubber seal (2) onto the flange of the suction opening
in the cover plate of the filter unit (4).
● Place the slewing ring (1) onto the rubber seal (2). Make sure
that the holes in the cover plate of the filter unit (4), the rubber
seal (2) and the slewing ring (1) match.
● Screw the slewing ring (1) with
– the round rubber seal (2) and
– the eight screws M6 x 25 (3)
onto the suction opening in the cover plate of the filter unit (4).
Assembly
5-4