Troubleshooting - Dometic SKYSCREEN POWERED Instructions De Montage Et De Service

Skyscreen Powered
Removing bugs
➤ To prevent damage to delicate fabrics, do not use any type of stick, wand or
handle to push out anything caught in your blinds. We recommend gently
blowing out using either a can of compressed air or a hair dryer on a cool
setting.
➤ The blind panels can be removed for cleaning.
Cleaning windows
➤ Always ensure your blinds are fully stowed before cleaning windows. This will
prevent spoiling the blind fabric by splatter or sprays of water or detergent.
Panels can be unclipped and removed for window cleaning (fig. 9, page 7
and fig. 0, page 7 for installations without headlining or fig. a, page 8 for
installations with headlining).
Replacing the fabric panel
➤ Fabrics can be removed for cleaning or replacement (fig. 9, page 7 and
fig. 0, page 7 for installations without headlining or fig. a, page 8 for
installations with headlining).
Due to batch variation, replacement fabric colours may vary slightly in shade.
10

Troubleshooting

Fault
Moving rail not straight
Moving rail jams.
Motor not working
Motor running slow or fast
EN
Solution
➤ Disconnect the first fabric panel at the
opposite end to the crooked moving
rail (fig. 9, page 7 and fig. 0, page 7
for installations without headlining or
fig. a, page 8 for installations with
headlining).
➤ Adjust the coupling (fig. b, page 8).
➤ Check the side tracks for debris or
obstructions.
➤ Check if wiring for voltage to the motor
is correct.
➤ If power supply is checked and the
motor is still faulty contact your
distributor.
➤ If using the AP Remote control refer to
the AP Remote control manual.
➤ Check for correct supply voltage.
Troubleshooting
19