Adjusting Fork; Adjustment Of The Handlebar Position; Adjusting The Rebound Damper - Beta Motorcycles RR 125 2T EUROPA 2019 Mode D'emploi

Apply the handlebar.
Apply the top u-bolt.
Refit the screws 6. Tighten to the torque
indicated.
ADJUSTMENT OF THE
HANDLEBAR POSITION
The handlebar can be adjusted by rotating
it back and forth.
To adjust the handlebar loosen screws 1.
Position the handlebar according to re-
quirements.
Tighten to the torque indicated.

ADJUSTING FORK

ADJUSTING THE REBOUND
DAMPER
The hydraulic rebound damper determines
the behaviour of the telescopic fork during
extension and can be adjusted by means
of knob A. Turning the screw clockwise
(towards +) increases the action of the
rebound damper; turning it anticlockwise
(towards -) decreases the action of the
rebound damper.
For standard calibration, refer to page
11.
6
1
A
43
3
25Nm
25Nm
EN