Key To Symbols; Brakes; Clutch; Front Brake - Beta Motorcycles RR 125 2T EUROPA 2019 Mode D'emploi

3
4
5
EN
1
2
3
7
6

KEY TO SYMBOLS

Tightening torque
Threadlocker Medium
Grease

BRAKES

FRONT BRAKE

The front brake is disk type with hydraulic
control.
The home position of brake lever 2 can be
adjusted by means of screw 1.

REAR BRAKE

The home position of brake pedal 3 can
be altered by turning adjusting screw 5 af-
ter loosening the counternut located under
dust cap 4. Loosen the counternut and turn
the adjusting screw until the desired height
is obtained. Retighten the counternut after
completing the operation.

CLUTCH

The adjustment screw 6 allows adjustment
of the distance of lever 7 from the knob.
The empty run is recovered automatically.
38