Periodic Inspection - Honeywell Miller Falcon Edge Mode D'emploi

8 – PERIODIC INSPECTION
Periodic inspection to check the equipment's effectiveness and resistance is
essential to ensure the user's safety.
The equipment must be inspected at least once a year. A qualified person must
inspect this equipment, as per the instructions (see paragraph 6).
After every periodic inspection, complete the sheet in Appendix 5. Inspections
must be more frequent, as directed by the regulations in force, if the device is used
frequently or in harsh environmental conditions. It is your responsibility to keep
this sheet up to date and in a safe place. If there are no entries on the identification
sheet, the product will be considered not to have been maintained and no warranty
will be provided by the manufacturer. Check that the product markings are legible.
During the periodic inspection, there is no obligation to open the control pad.
However, we recommend that the mechanism be checked by a technician trained
by the manufacturer (see the maintenance and repair manual) at intervals
determined by the type of use, see table below:
Frequency of inspection
Type of use
*: by a technician trained by the manufacturer
Examples of applications in accordance with type of use:
Not used to light use
Moderate to heavy use
Very heavy to continuous use
24
NT90024819 rev A.indd 24
Indoors
Clean at-
mosphere
Controlled
temperature
Occasional
Visual inspec-
use < 50
tion annually
times a year
Weekly use Visual inspec-
1 to 3 times tion annually
a week
Daily use 1 Visual inspec-
to 5 times a tion annually
day
Rescue, confined space or industrial
maintenance
Transport, construction, public services,
telephones, wind turbines
Petrochemicals, Mines, Training centre
Operating environment
Indoors/
Outdoors
Polluted
atmosphere
Uncontrolled
temperature
Visual inspec-
tion annually
Visual inspec-
tion annually
Visual inspec-
tion + open*
every 5 years
Outdoors
Corrosive
atmosphere
Extreme tem-
perature
Visual inspec-
tion annually
Visual inspec-
tion + open*
every 5 years
Visual inspec-
tion + open*
annually
17.07.17 12:37