Web Interface; Home Page - Bodet Style 5S Hopital - NTP Notice D'installation Et De Mise En Service

V

– Web interface

There are two ways to access the web interface to configure the clock:
1) Open an web browser and enter the IP address of the clock in the address bar. The clock IP
address is allocated automatically or entered by the installer (see page 9).
2) Run BODET Detect software and click on
networked clock (refer to the software instructions, ref.: 607548).
BODET Detect can be used to:
• Detect all clocks on the network
• Configure each clock (individually or by copying the settings for one clock to a group
of clocks)
• Update the clock's software version
• Check clock status
• Access downloaded MIB files

5.1 Home page

The clock web server home page contains general information about the clock.
The information is displayed as follows:
• Product: product type + SF (Single Face) or DF (Double Face) + SUP (Supervised).
• Name: user-defined clock name (default: Bodet-@MAC).
• Synchro: synchronisation status ("Strat 2" indicates that the clock is at the 2nd level from
the synchronisation source) + IP address of the server on which the clock is synchronised.
Example:
Strat 0
GPS Antenna
• Local date: current date.
• Local time: current time.
10
All manuals and user guides at all-guides.com
Strat 1
Master clock
to open the appropriate web server for the
Style 5S OP ou 7S OP
EN
Strat 2