Child Lock; Programmable Options; Brightness Setting - Franke SMART GN 86 M H XS Manuel D'installation Et Mode D'emploi

X Z
Using or buttons, adjust the desired
end of cooking time.
disappear but symbol will be still
flashing on the screen. This indicates that
an automatic cooking is programmed but
cooking has not started yet.
X Z
After 6 seconds of the last button push
or by pressing , the adjustment
will be completed, the display shows
the current time of day.
Auto cooking end
After the automatic cooking has been
completed, symbol will be flashing on the
screen and the buzzer alarm will sound.
Any button press will stop the alarm sound but
the flashing symbol will go on till
is pressed. The buzzer alarm will sound for
7 minutes if not stopped.
Power interrupts
„ „
After any interrupt of mains power, your
oven will be inactive after the power is
restored, for safety reasons.
„ „
After power on, the time of day digits
and symbol will flash and the
time of day has to be adjusted
(see power on).
Note: the flashing
the oven is inactive and you have to enter the
manual mode.

Child lock

This function is intented to prevent any
unauthorized modification of the timer settings.
„ „
This function will be active, within
30 seconds after the last button press.
will appear.
„ „
To deactive it, press the
3 seconds.
GN 86 M H XS / GN 86 M H BK / GN 86 M H WH
symbol will
button
symbol indicates that
button for
will disappear.

Programmable options

Alarm tone
„ „
Pressing and holding the
3 seconds will result in the currenly
valid buzzer tone being produced.
„ „
By pressing
may scroll through 3 available
buzzer tones.
„ „
The last heard buzzer tone will be
automatically recorded as the selected
tone.
„ „
After 6 seconds of the last button push
or by pressing
is completed.

Brightness setting

„ „
Pressing and holding the
3 seconds will result in the currenly
valid brightness setting being showed.
„ „
By pressing
you may scroll through 8 available
brightness setting.
„ „
The last seen brightness setting will be
automatically recorded as the selected
setting.
„ „
After 6 seconds of the last
button press or by pressing
the adjustment is completed.
Note: Default settings are highest.
Note: Programmable options are nonvolatile
and will be resident after any power failure.
– 13 –
button for
and buttons, you
, the adjustment
button for
and buttons,
,
EN