After Usage - Mesto 3593 Série Mode D'emploi

Observe the instructions in the section entitled "Safety".
Operate the device only while it is vertical or suspended upright and nearly vertical.
Avoid allowing drops of spray to drift onto areas that are not being treated.
1. Suspend the device from your shoulder.
+
3. Make certain the optimum spraying pressure is set
pressure gauge [16].
1.5 bar (21.8 psi)
2.0 bar (29.0 psi)
3.0 bar (43.5 psi)
4. If the spraying pressure decreases more than 0.5 bar
pump some more.
+

After Usage

Observe the instructions in the section entitled "Safety".
Never leave liquid in the device.
1. Pull up the red button on the safety valve [12] until all excess pressure is released from
the tank. (Fig. 4).
2. Lock the pump handle in place [13]. (Fig. 5).
3. Unscrew the pump [2] from the tank [1]. (Fig. 6).
Collect and dispose of the residual liquid and the tank according to all applicable
laws, requirements and regulations.
4. Empty and rinse the device with clear water.
6. For drying and storing the device, keep the tank and pump separate in a dry place
protected from sunlight and freezing temperatures.
Clean the protective equipment and yourself every time after usage.
80-01
0,29 l/min
0,32 l/min
0,39 l/min
17
) on the
hollow cone nozzle
80-02
0,56 l/min
0,64 l/min
0,78 l/min
from the optimum level,
(Fig. 15)
1,1 mm
0,48 l/min
0,56 l/min
0,69 l/min