After Usage; Care And Maintenance - Mesto FERROX 3585W Mode D'emploi

EN

After Usage

Observe the instructions in the section entitled "Safety".
Never leave liquid in the device.
1. Hold the plug-in coupling [15] and pull and simultaneously rotate its outer ring. (Fig. 11)
► The plug-in coupling [15] is disconnected from the plug-in nipple [16] on the device.
2. Pull up the red button on the safety valve [10] until all excess pressure is released from
the tank. (Fig. 3)
3. Lock the pump handle in place [11]. (Fig. 4)
4. Unscrew the pump [2] from the tank [1]. (Fig. 5)
5. Wipe off the device with a moist cloth.
6. Wind the hose [5] around the tank and connect the plug-in coupling [15] to the plug-in
mandrel on the water pressure tank [18]. (Fig. 12)
7. For drying and storing the water pressure tank, keep it in a dry place protected from
sunlight and freezing temperatures.
Collect and dispose of the residual liquid and the tank according to all applicable
laws, requirements and regulations.
Follow the instructions of the spray product manufacturer!
Clean the protective equipment and yourself every time after usage.

Care and maintenance

Observe the instructions in the section entitled "Safety".
After using the device 50 times or at least once a year:
• Disassemble the pump [2] and grease the diaphragm [20]. (Fig. 13 -14)
• Grease the O-ring [19]. (Fig. 14)
Observe the legal requirements of your country for accident prevention and check
the device in regular intervals.
Unless otherwise specified, we recommend that an expert carries out an external
test every 2 years and an internal test every 5 years as well as a strength test every
10 years.
16
ENGLISH