Cisco 1250 Série Guide De Démarrage Rapide page 34

Using the Web Browser Interface
Follow these steps to delete the current configuration and return all access
point settings to factory defaults using the web browser interface:
Step 1
Open your Internet browser. You must use Microsoft Explorer
(version 5.x or later) or Netscape Navigator (version 4.x or later).
Step 2 Enter the access point IP address in the browser address line, and
press Enter. An Enter Network Password window appears.
Step 3
Enter your username in the User Name field.
Step 4
Enter your password in the Password field and press Enter. The
Summary Status page appears.
Step 5 Click System Software. The System Software page appears.
Step 6
Click System Configuration. The System Configuration page
appears.
Step 7
Click the Reset to Defaults or Reset to Defaults (Except IP)
button (depending on your configuration).
Step 8
After the access point reboots, reconfigure it.
34
78-17831-01B0