Unpacking the Access Point
Package Contents
Each access point package contains the following items:
•
Cisco Aironet 1250 series autonomous access point
•
Mounting hardware kit
– One mounting plate, two 4 x 40 x 3/16 in screws, and a mounting
plate latch (all attached to the access point)
– Two suspended ceiling T-rail clips, spacers (accommodates
standard and recessed T-rails), and nuts
– Four 8 x 18 x 3/4 in pan head Phillips sheet metal screws
– Four #8 plastic wall anchors
– One 10 x 24 nut (for ground stud on the mounting plate)
– Two cable tie wraps
•
Product quick start guide
•
Product translated safety warning document
•
Cisco product registration card
10
78-17831-01B0