In Case of Difficulty
If you followed the instructions in previous sections of this guide, you should
have had no trouble getting your access point installed and running. If you do
experience difficulty, the following sections provide basic troubleshooting
information.
Before contacting Cisco, look for a solution to your problem in this guide or
the "Troubleshooting" chapter of the Cisco Aironet 1250 Series Access Point
Hardware Installation Guide.
Follow this link to access the Technical Assistance Center (TAC) on
Cisco.com:
www.cisco.com/cisco/web/support/index.html
Checking the Access Point LEDs
If your access point is not working properly, check the Status, Ethernet, and
Radio LEDs on the top panel. You can use the LED colors to assess the unit
status.
The LED meanings are in the following table.
30
78-17831-01B0