Cisco 1250 Série Guide De Démarrage Rapide page 32

Ethernet LED Radio LED
Blinking –
amber
– Blinking
amber
Red Red
– –
For more details on these LED status codes, see the "Troubleshooting"
chapter of the Cisco Aironet 1250 Series Access Point Hardware Installation
Guide.
Resetting to Default Configuration
Note These steps reset all configuration settings to factory defaults,
including passwords, WEP keys, the IP address, and the SSID.
32
Status LED Meaning
– Ethernet transmit or receive
errors.
– Maximum retries or buffer
full failure on radio.
– Software failure.
Cycling General warning; insufficient
blue, green, inline power.
red, off
78-17831-01B0