Cisco 1250 Série Guide De Démarrage Rapide page 28

The following basic settings must be configured on your access point.
• Host Name
•
Configuration Server Protocol
•
IP Address
• IP Subnet Mask
•
Default Gateway
•
SNMP Community
The following radio settings must be applied separately to each radio.
•
Role in Radio Network
•
Optimize Radio Network For
• Aironet Extensions
Configuring Security Settings
After you assign basic settings to your access point, you must configure
security settings to prevent unauthorized access to your network. Because it
is a radio device, the access point can communicate beyond the physical
boundaries of your work site.
28
78-17831-01B0