Mounting The Access Point - Cisco 1250 Série Guide De Démarrage Rapide

Installation Summary
Installing the access point involves these operations:
•

Mounting the Access Point

•
Connecting Power
• Obtaining and Assigning an IP Address
•
Configuring Power
•
Configuring Security Settings
Mounting the Access Point
Detailed mounting instructions are in the Cisco Aironet 1250 Series Access
Point Hardware Configuration Guide. This document is available on
Cisco.com.
UL 2043 Compliance
The access point has adequate fire resistance and low smoke-producing
characteristics. The device is suitable for operation in a building's
environmental air space, such as above suspended ceilings. The access point
complies with with Section 300-22(c) of the NEC and with Sections 2-128,
12-010(3), and 12-100 of the Canadian Electrical Code, Part 1, C22.1.
Quick Start Guide: Cisco Aironet 1250 Series Access Point
17