Yamaha Motor F175 Manuel De L'utilisateur page 108

Trouble Recovery
1. Stop the engine.
2. Remove the top cowling.
3. Disconnect the water detection switch
coupler. NOTICE: Be careful not to get
any water on the water detection
switch coupler, otherwise a malfunc-
tion could occur.
1. Water detection switch coupler
4. Remove the filter cup from the filter
housing, and then remove the O-ring
from the filter cup. NOTICE: Be careful
not to twist the water detection switch
lead when unscrewing the filter cup.
[ECM01961]
102
ZMU07859
[ECM01951]
1
ZMU07789
4
1. Filter housing
2. O-ring
3. Filter cup
4. Water detection switch lead
5. Drain the water in the filter cup by soak-
ing it up with a rag.
6. Put the O-ring on the filter cup in its orig-
inal position, and then install the filter cup
onto the filter housing. NOTICE: Be
careful not to twist the water detec-
tion switch lead when screwing the fil-
ter cup onto the filter housing.
1
2
3
1. O-ring
2. Filter cup
3. Water detection switch lead
7. Connect the water detection switch cou-
pler securely until a click is heard.
8. Install the top cowling.
9. Turn the main switch to the "
sition and check that the water separa-
tor-alert indicator remains off and the
buzzer does not sound. If the water sep-
1
2
3
ZMU07790
[ECM01971]
ZMU07791
" (on) po-