Plusmed pM-B51 Mode D'emploi page 38

Troubleshooting
SYMBOLS &
SYMPTOMS
Unit does not
turn on when
button is pushed.
Measuring Error
Symbol appears
when blood
pressure value
displayed is exces-
sively low or high.
Measuring Error
Symbol
Measuring Error
Symbol
Measuring Error
Symbol
Note! If „EP" appears on the display, just return the device to your local
distributor.
CONDITIONS &
CAUSES
Worn-out batteries.
Battery polarities
have been positi-
oned incorrectly.
Cuff has been pla-
ced incorrectly.
Did you talk or
move during mea-
surement?
Shaking of the
arm with the cuff
on.
Air circuit abnor-
mality. Cuff tube
may not be plug-
ged into monitor
correctly.
Inflation pressure
exceeding 300
mmHg.
Error determining
measurement
data.
INDICATION &
CORRECTION
Replace them with 2 new
AAA alkaline batteries.
Re-insert the batteries in the
correct positions.
Wrap the cuff properly so
that it is positioned correctly.
Measure again. Keep arm
steady during measurement.
Measure again. Keep arm
steady during measurement.
Check cuff connection. Mea-
sure again.
Switch the unit off, then mea-
sure again.
Measure again.