Safety Regulations; Structural Modifications And Spare Parts; Signs; Residual Risk - Speck pumpen BADU Genio Traduction Des Instructions D'utilisation D'origine

2.3

Safety regulations

The operator of the system is responsible for the adherence to all
relevant statutory regulations and guidelines.
 Observe the following regulations when using the pump/unit:
– This manual
– Warning and information signs on the product
– Other applicable documents
– The valid national regulations for accident prevention
– The internal occupational, operational and safety
regulations of the operator
2.4

Structural modifications and spare parts

Alterations or modifications can affect operational safety.
 Never modify or alter the pump/unit without the
manufacturer's permission.
 Only use original spare parts and accessories authorised by
the manufacturer.
2.5

Signs

 Ensure that all the signs on the complete pump/unit remain
legible.
2.6

Residual risk

2.6.1

Electrical energy

There is an increased risk of electric shock when working on the
electrical system due to the humid environment.
Electrical protective earth conductors which were not installed
correctly can also result in electric shocks, for example due to
oxidation or cable breakage.
 Observe VDE and utility company regulations.
 Build swimming pools and their protection according to
DIN VDE 0100-702.
 Before working on the electrical system, take the following
measures:
– Disconnect system from the power supply.
– Attach a warning sign: "Do not switch on! The system is
being worked on."
– Ensure that the system is free of voltage.
 Check the electrical system regularly to ensure it is in proper
working condition.
09|2019
Safety
EN 9