Thermal Heat Pump Mode; Solar Mode - Speck pumpen BADU Genio Traduction Des Instructions D'utilisation D'origine

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7.8.4

Thermal heat pump mode

The operation and control of the thermal heat pump are identical
to the heating.
7.8.5

Solar mode

The function of the BADU Logic 3 comes into action when the
solar mode is selected.
You can choose between the "On" and "Switching time" types of
operation. The heating times can be defined under Timer.
The actual temperature indicates the current temperature of the
pool water. The switch-off temperature of the pool water sensor is
displayed at max. temperature. Either "On" or "Off" is displayed
under Switching state. If this value is exceeded at the sensor, the
controller switches off the relevant heating relay. When it drops
back below this value at the sensor and all other conditions are
satisfied additionally, the controller switches the heating relay
09|2019
Operation
EN 39

Publicité

Table des Matières
loading

Table des Matières