Setting The Backflush Interval; Setting Adjustment Times; Manual Backflush Valve - Speck pumpen BADU Genio Traduction Des Instructions D'utilisation D'origine

Operation

7.10.1 Setting the backflush interval

Basically, 3 different backflush intervals can be set:
• Off
• Days 1 ... 30
• Mo, Tu, We, Th, Fr, Sa, Su
Any time can be set. The backflushing then starts automatically
depending on the set time. The two settings backflush interval and
time are defined by the "Set interval" command.

7.10.2 Setting adjustment times

The duration for the backflushing time and the rinsing time can be
defined in minutes and seconds under Adjustment times.

7.10.3 Manual backflush valve

Take the following steps if a manual backflush valve is installed:
1. Wire bridge (12 V), from terminal X2:3 to input I06
2. Backflush interval on "Off".
3. Filter pump manual operation.
48 EN 09|2019