Operation
The basic temperature of the pool water is generated by the
thermal heat pump/electric flow heater and must be set directly on
the device to 22 °C for example. The solar enable is now set in
the BADU Genio. The solar heating will heat up the water to the
set maximum temperature, e.g. 26 °C. The heating is generated
by regenerative energy.
7.9
Filter pump
The following settings can be made in the filter pump control
system.
The mode can be changed from automatic to manual.
The manual pump delivery rate can be selected between stage 1,
stage 2, stage 3 and off. The filter pump runs in the selected
stage in manual operation. In automatic mode, the pump runs
automatically in the set filter time.
42 EN
09|2019