Attractions - Speck pumpen BADU Genio Traduction Des Instructions D'utilisation D'origine

Operation
There are 3 different setting options in the parameters:
• Operating mode: skimmer mode
• Delay: Switch-on delay in minutes for wave suppression
• Maximum supply: Triggers a message when the set time in
minutes is exceeded (protective function).
• There is a fixed time for a lag of 30 seconds. The valve must
then always be open for at least 30 seconds to prevent
oscillations (waves).

7.14 Attractions

The "Attraction" function can be found in the menu. There, up to
three different attractions can be controlled.
The attractions can be given any names in the parameters.
54 EN 09|2019