Speck pumpen BADU Genio Traduction Des Instructions D'utilisation D'origine page 113

Operation
Up to 10 different filter times can be defined under Timer.
The filter time is set by a switch-on time and a switch-off time. The
pump runs in the set switching stage (1, 2 or 3) during the
corresponding time period. The filter times can also be set
individually for the days of the week. If a filter timeout is
programmed, the filter time with the higher speed is always given
priority.
In order to maintain continuous filter pump operation, the timer
must always be programmed as in the following example. In filter
time 1, the switching time OFF must be identical with the
switching time ON in filter time 2. Of course, the times are only
examples.
09|2019 EN 43